Buy America Waiver Notification

Gregory G. Nadeau
Federal Highway Administration
May 18, 2015

[Federal Register Volume 80, Number 95 (Monday, May 18, 2015)]
[Notices]
[Pages 28341-28342]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-11905]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Highway Administration


Buy America Waiver Notification

AGENCY: Federal Highway Administration (FHWA), DOT.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: This notice provides information regarding FHWA's finding that 
a Buy America waiver is appropriate for the use of non-domestic steel 
cable nets for truck escape ramps used in a dragnet impact absorption 
system on State route (SR) 431, US550, and SR163 in the State of 
Nevada.

DATES: The effective date of the waiver is May 19, 2015.

FOR FURTHER INFORMATION CONTACT: For questions about this notice, 
please contact Mr. Gerald Yakowenko, FHWA Office of Program 
Administration, (202) 366-1562, or via email at 
gerald.yakowenko@dot.gov. For legal questions, please contact Mr. Jomar 
Maldonado, FHWA Office of the Chief Counsel, (202) 366-1373, or via 
email at Jomar.Maldonado@dot.gov. Office hours for the FHWA are from 
8:00 a.m. to 4:30 p.m., e.t., Monday through Friday, except Federal 
holidays.

SUPPLEMENTARY INFORMATION: 

Electronic Access

    An electronic copy of this document may be downloaded from the 
Federal Register's home page at: http://www.archives.gov and the 
Government Printing Office's database at: http://www.access.gpo.gov/nara.

Background

    The FHWA's Buy America policy in 23 CFR 635.410 requires a domestic 
manufacturing process for any steel or iron products (including 
protective coatings) that are permanently incorporated in a Federal-aid 
construction project. The regulation also provides for a waiver of the 
Buy America requirements when the application would be inconsistent 
with the public interest or when satisfactory quality domestic steel 
and iron products are not sufficiently available. This notice provides 
information regarding FHWA's finding that a Buy America waiver is 
appropriate for use of non-domestic steel cable nets used in a dragnet 
impact absorption system for truck escape ramps on SR431, US550, and 
SR163 in the State of Nevada.
    In accordance with Division K, section 122 of the ``Consolidated 
and Further Continuing Appropriations Act, 2015'' (Pub. L. 113-235), 
FHWA published a notice of intent to issue a

[[Page 28342]]

waiver on its Web site for non-domestic steel cable nets (http://www.fhwa.dot.gov/construction/contracts/waivers.cfm?id=107) on April 6. 
The FHWA received no comments in response to the publication. During 
the 15-day comment period, FHWA conducted additional review to locate 
potential domestic manufacturers of steel cable nets for dragnet impact 
absorption system. Based on all the information available to the 
agency, FHWA concludes that there are no domestic manufacturers of the 
of the steel cable nets for the dragnet impact absorption system for 
truck escape ramps on SR431, US550, and SR163 in the State of Nevada.
    In accordance with the provisions of section 117 of the SAFETEA-LU 
Technical Corrections Act of 2008 (Pub. L. 110-244, 122 Stat. 1572), 
FHWA is providing this notice as its finding that a waiver of Buy 
America requirements is appropriate. The FHWA invites public comment on 
this finding for an additional 15 days following the effective date of 
the finding. Comments may be submitted to FHWA's Web site via the link 
provided to the Nevada waiver page noted above.

    Authority: 23 U.S.C. 313; Pub. L. 110-161, 23 CFR 635.410

    Issued on: May 8, 2015.
Gregory G. Nadeau,
Deputy Administrator, Federal Highway Administration.
[FR Doc. 2015-11905 Filed 5-15-15; 8:45 am]
 BILLING CODE 4910-22-P