Home Page American Government Reference Desk Shopping Special Collections About Us Contribute



Escort, Inc.






GM Icons
By accessing/using The Crittenden Automotive Library/CarsAndRacingStuff.com, you signify your agreement with the Terms of Use on our Legal Information page. Our Privacy Policy is also available there.

Vehicle-Mounted Elevating and Rotating Work Platforms (Aerial Lifts); Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements


American Government

Vehicle-Mounted Elevating and Rotating Work Platforms (Aerial Lifts); Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements

Loren Sweatt
Department of Labor
20 February 2018


[Federal Register Volume 83, Number 34 (Tuesday, February 20, 2018)]
[Notices]
[Pages 7235-7236]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-03371]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2011-0185]


Vehicle-Mounted Elevating and Rotating Work Platforms (Aerial 
Lifts); Extension of the Office of Management and Budget's (OMB) 
Approval of Information Collection (Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration, Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning its proposal to 
extend OMB approval of the information collection requirements 
contained in the Standard on Vehicle-Mounted Elevating and Rotating 
Work Platforms (Aerial Lifts). The purpose of the requirements is to 
reduce workers' risk of death or serious injury by ensuring that aerial 
lifts are in safe operating condition.

DATES: Comments must be submitted (postmarked, sent, or received) by 
April 23, 2018.

ADDRESSES: 
    Electronically: You may submit comments and attachments 
electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, Docket No. OSHA-2011-0185, 
Occupational Safety and Health Administration, U.S. Department of 
Labor, Room N-3653, 200 Constitution Avenue NW, Washington, DC 20210. 
Deliveries (hand, express mail, messenger, and courier services) are 
accepted during the Docket Office's normal business hours, 10:00 a.m. 
to 3:00 p.m., E.T.
    Instructions: All submissions must include the Agency name and the 
OSHA docket number (OSHA-2011-0185) for the Information Collection 
Request (ICR). All comments, including any personal information you 
provide, are placed in the docket without change and may be made 
available online at http://www.regulations.gov. For further information 
on submitting comments, see the ``Public Participation'' heading

[[Page 7236]]

in the section of this notice titled SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other materials in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket (including this Federal 
Register notice) are listed in the http://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download from the website. All submissions, 
including copyrighted material, are available for inspection and 
copying at the OSHA Docket Office. You may also contact Theda Kenney at 
the address below to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT:  Charles McCormick or Theda Kenney, 
Directorate of Standards and Guidance, OSHA, U.S. Department of Labor, 
telephone (202) 693-2222.

SUPPLEMENTARY INFORMATION: 

I. Background

    The Department of Labor, as part of its continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accordance with the Paperwork Reduction Act 
of 1995 (PRA-95) (44 U.S.C. 3506(c)(2)(A)). This program ensures that 
information is in the desired format, reporting burden (time and costs) 
is minimal, collection instruments are clearly understood, and OSHA's 
estimate of the information collection burden is accurate. The 
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 
et seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the OSH Act or for developing 
information regarding the causes and prevention of occupational 
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also 
requires that OSHA obtain such information with minimum burden upon 
employers, especially those operating small businesses, and to reduce 
to the maximum extent feasible unnecessary duplication of efforts in 
obtaining information (29 U.S.C. 657).
    Manufacturer's Certification of Modifications (Sec.  
1910.67(b)(2)). The Standard requires that when aerial lifts are 
``field modified'' for uses other than those intended by the 
manufacturer, the manufacturer or other equivalent entity, such as a 
nationally recognized testing laboratory, must certify in writing that 
the modification is in conformity with all applicable provisions of 
ANSI A92.2-1969 and the OSHA standard and that the modified aerial lift 
is at least as safe as the equipment was before modification. Employers 
are to maintain the certification record and make it available to OSHA 
compliance officers upon request. This record provides assurance to 
employers, workers, and compliance officers that the modified aerial 
lift is safe for use, thereby preventing failure while workers are 
being elevated. The certification record also provides the most 
efficient means for the compliance officers to determine that an 
employer is complying with the Standard.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the Agency's functions, 
including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    There are no adjustments or program changes associated with this 
package.
    Type of Review: Extension of a currently approved collection.
    Title: Vehicle-Mounted Elevating and Rotating Work Platforms 
(Aerial Lifts) (29 CFR 1910.67).
    OMB Control Number: 1218-0230.
    Affected Public: Business or other for-profits.
    Number of Respondents: 1,000.
    Number of Responses: 1,000.
    Frequency of Responses: On occasion.
    Average Time per Response: Various.
    Estimated Total Burden Hours: 20.
    Estimated Cost (Operation and Maintenance): $0.

IV. Public Participation--Submission of Comments on This Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All 
comments, attachments, and other materials must identify the Agency 
name and the OSHA docket number for the ICR (Docket No. OSHA-2011-
0185). You may supplement electronic submissions by uploading document 
files electronically. If you wish to mail additional materials in 
reference to an electronic or facsimile submission, you must submit 
them to the OSHA Docket Office (see the section of this notice titled 
ADDRESSES). The additional materials must clearly identify your 
electronic comments by your name, date, and the docket number so the 
Agency can attach them to your comments.
    Because of security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments. For information about 
security procedures concerning the delivery of materials by hand, 
express delivery, messenger, or courier service, please contact the 
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
    Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as social security numbers and 
dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download from this 
website. All submissions, including copyrighted material, are available 
for inspection and copying at the OSHA Docket Office. Information on 
using the http://www.regulations.gov.
    Website to submit comments and access the docket is available at 
the website's ``User Tips'' link. Contact the OSHA Docket Office for 
information about materials not available from the website, and for 
assistance in using the internet to locate docket submissions.

V. Authority and Signature

    Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational 
Safety and Health, directed the preparation of this notice. The 
authority for this notice is the Paperwork Reduction Act of 1995 (44 
U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 (77 FR 
3912).

    Signed at Washington, DC, on February 13, 2018.
Loren Sweatt,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2018-03371 Filed 2-16-18; 8:45 am]
 BILLING CODE 4510-26-P




The Crittenden Automotive Library