Federal Motor Carrier Safety Regulations (FMCSRs) Which May Be a Barrier to the Safe Integration of Automated Driving Systems (ADS) in Commercial Motor Vehicle (CMV) Operations; Public Meeting |
|---|
|
Raymond P. Martinez
Federal Motor Carrier Safety Administration
11 June 2018
[Federal Register Volume 83, Number 112 (Monday, June 11, 2018)]
[Proposed Rules]
[Pages 26942-26944]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-12499]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Motor Carrier Safety Administration
49 CFR Chapter III
[Docket No. FMCSA-2018-0037]
Federal Motor Carrier Safety Regulations (FMCSRs) Which May Be a
Barrier to the Safe Integration of Automated Driving Systems (ADS) in
Commercial Motor Vehicle (CMV) Operations; Public Meeting
AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT.
ACTION: Notice of public listening session.
-----------------------------------------------------------------------
SUMMARY: FMCSA announces a public listening session on June 19, 2018,
to solicit information on issues relating to the design, development,
testing, and integration of ADS-equipped CMVs on our Nation's roadways.
The listening session will provide interested parties with an
opportunity to assist the Agency's future rulemaking efforts by sharing
their views on the FMCSRs as they relate to the development and safe
integration of ADS. It will also allow FMCSA to share with stakeholders
the Agency's ADS strategy and open a channel for two-way communication.
This listening session will supplement the information gathered from
FMCSA's previous requests for comment on issues related to automation
by targeting stakeholders from whom they have not previously received
comments, including academia, insurance groups, and technology
providers and developers. Attendees are also encouraged to share any
data or analysis on this topic with Agency representatives.
DATES: The meeting will be held Tuesday, June 19, 2018, from 1:00 p.m.
to 3:00 p.m., Eastern Daylight Time (EDT), at the University of
Michigan's Mcity in Ann Arbor, Michigan. Research Auditorium, 2800
Plymouth Street, Bldg. 10, Ann Arbor, MI 48109.
Please use the following link to RSVP and find additional
information about this public meeting as it approaches: https://fmcsaads.eventbrite.com/. Information about this listening session can
also be found at: https://www.transportation.gov/AV.
FOR FURTHER INFORMATION CONTACT: Mr. William Cunnane, Program
Specialist, Program Integration Office, Federal Motor Carrier Safety
Administration, U.S. Department of Transportation, 1200 New Jersey
Avenue SE, Washington, DC 20590, email: fmcsaads@dot.gov.
[[Page 26943]]
Services for Individuals with Disabilities: For information on
facilities or services for individuals with disabilities or to request
special assistance at the meeting, please contact Victoria Waters at
(734) 647-4217 by June 12, 2018.
SUPPLEMENTARY INFORMATION:
I. Background
FMCSA is responsible for overseeing the safety of CMVs, their
drivers, and those motor carriers operating CMVs in interstate
commerce. The Agency works with Federal, State, and local enforcement
agencies, the motor carrier industry, safety groups, and organized
labor to reduce crashes, injuries, and fatalities involving large
trucks and buses.
The FMCSRs provide rules to support the safe operation of CMVs, as
defined in 49 CFR 390.5, which includes vehicles with a gross vehicle
weight/gross combination weight or gross vehicle weight rating/gross
combination weight rating, whichever is greater, of 10,001 pounds or
more; passenger-carrying vehicles designed or used to transport nine to
15 passengers for direct compensation; passenger-carrying vehicles
designed or used to transport 16 or more passengers; and any size
vehicle transporting hazardous materials in a quantity requiring
placards.
On September 12, 2017, the Department published the Automated
Driving Systems (ADS): A Vision for Safety 2.0. (the Voluntary
Guidance), adopting the SAE International (SAE) J3016 standard's
definitions for levels of automation.\1\ The SAE definitions divide
vehicles into levels based on ``who does what, when.'' Generally:
---------------------------------------------------------------------------
\1\ Publication No. DOT HS 812 442.
---------------------------------------------------------------------------
SAE Level 0, No Driving Automation; the driver performs
all driving tasks.
SAE Level 1, Driver Assistance; the vehicle is controlled
by the driver, but some driving assist features may be included in the
vehicle design.
SAE Level 2, Partial Driving Automation; the vehicle has
combined automated functions, like acceleration and steering, but the
driver must remain engaged with the driving task and monitor the
environment at all times.
SAE Level 3, Conditional Driving Automation; the driver is
a necessity, but is not required to monitor the environment. The driver
must be ready to take control of the vehicle at all times with notice.
SAE Level 4, High Driving Automation; the vehicle is
capable of performing all driving functions under certain conditions.
The driver may have the option to control the vehicle.
SAE Level 5, Full Driving Automation: the vehicle is
capable of performing all driving functions under all conditions.
Using the SAE levels described above, the Department draws a
distinction between Levels 0-2 and 3-5 based on whether the human
driver or the automated system is primarily responsible for monitoring
the driving environment. For the purposes of this public meeting,
FMCSA's primary focus is SAE Levels 3-5 ADS.
FMCSA encourages the development of these advanced safety
technologies for use in CMVs. The Agency also recognizes the need to
work with the States and localities to ensure that all testing and use
of these advanced safety systems supports the safe operation and
deployment of ADS-equipped CMVs.
II. FMCSA's 2018 Request for Comments
On March 28, 2018, FMCSA published ``Request for Comments (RFC)
Concerning Federal Motor Carrier Safety Regulations (FMCSRs) Which May
Be a Barrier to the Safe Testing and Deployment of Automated Driving
Systems-Equipped Commercial Motor Vehicles on Public Roads.'' \2\ The
notice solicited public comments on existing Federal Motor Carrier
Safety Regulations (FMCSRs) that may need to be updated, modified, or
eliminated to facilitate the safe introduction of automated driving
systems (ADS)-equipped commercial motor vehicles (CMVs) onto our
Nation's roadways. The Agency indicated that it had commissioned the
U.S. Department of Transportation's (DOT) John A. Volpe National
Transportation Systems Center (Volpe) to conduct a preliminary review
of the FMCSRs to identify regulations that may relate to the
development, testing, and safe deployment of ADS. The Agency requested
comments on this report in the RFC, including whether any of FMCSA's
current safety regulations presented barriers to innovation and
research related to ADS-equipped CMVs. Further, FMCSA requested
comments on certain FMCSRs likely to be affected as ADS-equipped CMVs
are increasingly integrated into our roadways, including regulations
concerning hours of service and driver fatigue, the use of electronic
devices, roadside inspection, and Commercial Driver's License
requirements.
---------------------------------------------------------------------------
\2\ Docket No. FMCSA-2018-0037 [March 26, 2018-May 10, 2018].
---------------------------------------------------------------------------
To further support FMCSA's effort to understand necessary changes
to the FMCSRs, FMCSA requested information from companies and others
engaged in the design, development, testing, and integration of ADS-
equipped CMVs into their fleets. Specifically, the Agency requested
information about: (1) The scenarios and environments in which ADS is
being tested and will soon be integrated into CMVs operating on public
roads or in interstate commerce; (2) the operational design domains
(ODD) in which these systems are being operated, tested, and deployed;
and (3) suggested measures to ensure the protection of any proprietary
or confidential business information shared with the Agency on this
topic.
The comment period ended on May 10, 2018. Interested parties can
view the comments the Agency received at www.regulations.gov (docket
number FMCSA-2018-0037).
In the Spring Regulatory and Deregulatory Agenda issued after the
publication of the March 28 RFC notice, FMCSA announced the initiation
of rulemaking concerning ADS-equipped CMVs beginning with an Advance
Notice of Proposed Rulemaking (ANPRM), which is currently scheduled to
be published in December 2018 (``Safe Integration of Automated Driving
Systems-Equipped Commercial Motor Vehicles,'' 2126-AC17).
III. Meeting Participation
FMCSA hopes to supplement the information gathered from the RFC by
targeting stakeholders from whom they have not previously received many
comments, including academia, insurance groups, and technology
providers and developers. The listening session will provide interested
parties an opportunity to assist the Agency's future rulemaking efforts
by sharing their views on the FMCSRs as they relate to the development
and safe integration of ADS through oral presentations. FMCSA also
hopes to use this listening session as a platform to share the Agency's
ADS strategy with the public. The Agency will provide the public with
all relevant details and the opportunity to register for this meeting
at https://fmcsaads.eventbrite.com/. Information about this listening
session can also be found at: https://www.transportation.gov/AV.
Oral comments from the public will be heard during the meeting.
Members of the public may also submit written comments to public docket
referenced at the beginning of this notice using any of the following
methods:
Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the online instructions for submitting
comments.
[[Page 26944]]
Fax: 202-493-2251.
Mail: Docket Management Facility; U.S. Department of
Transportation, 1200 New Jersey Avenue SE, Room W12-140, Washington, DC
20590.
Hand Delivery: U.S. Department of Transportation, 1200 New
Jersey Avenue SE, West Building, Room W12-140, Washington, DC, between
9 a.m. and 5 p.m., E.T. Monday through Friday, except Federal holidays.
Issued on: June 5, 2018.
Raymond P. Martinez,
Administrator.
[FR Doc. 2018-12499 Filed 6-8-18; 8:45 am]
BILLING CODE 4910-EX-P