Pontiac cold air intake: trick to getting maximum power efficiency

Anthony Fontanelle
September 12, 2007

The trick to getting more performance and power out of your Pontiac vehicle depends on cleaner air. You know that your internal combustion engine needs a balanced mixture of air and fuel for an efficient combustion. Through the air box and intake tube loaded with disposable air filters, your Pontiac is able to draw outside air. However, a considerable drop of air volume happens because the intake tube is made up of multiple bends and turns. It stocks the air and makes it warmer, so you do not get maximum power efficiency because of incomplete combustion. You can solve this problem by equipping your Pontiac with an air intake kit. This is a combination of car parts that provides your vehicle with a higher volume of air. As a result, igniting fuel is more balanced, so you get maximized power and throttle response. An air intake system would not be able to perform its intended function if one or more of its sub components are not in good working condition. Among the various parts that play a huge role in your air intake system is the Pontiac cold air intake.

Basically, your Pontiac cold air intake plays an important role of increasing the amount of oxygen for a more complete combustion. It works by providing your hot engine bay with cooler air from the outside. Your engine can operate at warmer temperature; however, cold air is a lot denser than hot air so it allows your engine to perform optimally, resulting to an extra amount of power. Aside from that, your Pontiac cold air intake provides you with two benefits. First, it provides your car with a “throaty” intake noise. Second, it improves the look of your engine bay. There are different types of cold air intakes in the automotive market. These are the Ram cold air intake, Short Ram cold air intake, and the Long Ram cold air intake. The Ram cold air intake works by forcing induction into the engine by using outside air. Short Ram cold air intake, on the other hand, provides warmer and less dense air because they pull in air closer to the engine. Lastly, Long Ram cold air intake increases the volumetric efficiency within the cylinders. This is possible because they feature mandrel bent tubing that replaces the restrictive air boxes.

When looking for the right Pontiac cold air intake for your car, it is recommended that you consider some points. To reduce the blockage of air, the tubes must have a smooth interior. Aside from that, the air filters should be efficient. And lastly, the measurement of the cold air intake mouth must be big enough to allow free flow of air. Various materials are used in the construction of cold air intakes. Some of these include fiberglass, silicone, plastic, carbon fibers, and metal. Although installing a Pontiac cold air intake can be good for your car, it has some minor flaws also. During rainy seasons, this car component would not be effective since the flow of air is not proper. You can address this problem by relocating the cold air intake or installing a water shield to protect it from water.

Source:  Amazines.com