Passenger Vehicle and Light Truck Tires From the Socialist Republic of Vietnam: Preliminary Affirmative Countervailing Duty Determination and Alignment of Final Determination With Final Antidumping Duty Determination

Jeffrey I. Kessler
Department of Commerce
10 November 2020

[Federal Register Volume 85, Number 218 (Tuesday, November 10, 2020)]
[Notices]
[Pages 71607-71610]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-24913]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[C-552-829]


Passenger Vehicle and Light Truck Tires From the Socialist 
Republic of Vietnam: Preliminary Affirmative Countervailing Duty 
Determination and Alignment of Final Determination With Final 
Antidumping Duty Determination

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.


[[Page 71608]]


SUMMARY: The Department of Commerce (Commerce) preliminarily determines 
that countervailable subsidies are being provided to producers and 
exporters of passenger vehicle and light truck tires (passenger tires) 
from the Socialist Republic of Vietnam (Vietnam). The period of 
investigation is January 1, 2019 through December 31, 2019. Interested 
parties are invited to comment on this preliminary determination.

DATES: Applicable November 10, 2020.

FOR FURTHER INFORMATION CONTACT: Michael Romani or Thomas Schauer, AD/
CVD Operations, Office I, Enforcement and Compliance, International 
Trade Administration, U.S. Department of Commerce, 1401 Constitution 
Avenue NW, Washington, DC 20230; telephone: (202) 482-0198 or (202) 
482-0410, respectively.

SUPPLEMENTARY INFORMATION:

Background

    This preliminary determination is made in accordance with section 
703(b) of the Tariff Act of 1930, as amended (the Act). Commerce 
published the notice of initiation of this investigation on June 29, 
2020.\1\ On August 4, 2020, Commerce postponed the preliminary 
determination of this investigation and the revised deadline is now 
October 30, 2020.\2\ For a complete description of the events that 
followed the initiation of this investigation, see the Preliminary 
Decision Memorandum.\3\ A list of topics discussed in the Preliminary 
Decision Memorandum is included as Appendix II to this notice. The 
Preliminary Decision Memorandum is a public document and is on file 
electronically via Enforcement and Compliance's Antidumping and 
Countervailing Duty Centralized Electronic Service System (ACCESS). 
ACCESS is available to registered users at http://access.trade.gov. The 
signed and electronic versions of the Preliminary Decision Memorandum 
are identical in content.
---------------------------------------------------------------------------

    \1\ See Passenger Vehicle and Light Truck Tires from the 
Socialist Republic of Vietnam: Initiation of Countervailing Duty 
Investigation, 85 FR 38850 (June 29, 2020) (Initiation Notice).
    \2\ See Passenger Vehicle and Light Truck Tires from the 
Socialist Republic of Vietnam: Postponement of Preliminary 
Determination in the Countervailing Duty Investigation, 85 FR 48666 
(August 12, 2020).
    \3\ See Memorandum, ``Decision Memorandum for the Preliminary 
Affirmative Determination: Countervailing Duty Investigation of 
Passenger Vehicle and Light Truck Tires from the Socialist Republic 
of Vietnam,'' dated concurrently with, and hereby adopted by, this 
notice (Preliminary Decision Memorandum).
---------------------------------------------------------------------------

Scope of the Investigation

    The product covered by this investigation is passenger tires from 
Vietnam. For a complete description of the scope of this investigation, 
see Appendix I.

Scope Comments

    In accordance with the Preamble to Commerce's regulations,\4\ the 
Initiation Notice set aside a period of time for parties to raise 
issues regarding product coverage (i.e., scope).\5\ Certain interested 
parties commented on the scope of the antidumping duty (AD) and 
countervailing duty (CVD) investigations of passenger tires as it 
appeared in the Initiation Notice. We are currently evaluating the 
scope comments filed by the interested parties. Commerce intends to 
issue its preliminary decision regarding the scope of the AD and CVD 
investigations in the preliminary determinations of the companion AD 
investigations, the deadline for which is December 29, 2020.\6\ We will 
incorporate the scope decisions from the AD investigations into the 
scope of the final CVD determination for this investigation after 
considering any relevant comments submitted in scope case and rebuttal 
briefs.\7\
---------------------------------------------------------------------------

    \4\ See Antidumping Duties; Countervailing Duties, Final Rule, 
62 FR 27296, 27323 (May 19, 1997) (Preamble).
    \5\ See Initiation Notice, 85 FR at 38851.
    \6\ See Passenger Vehicle and Light Truck Tires from the 
Republic of Korea, Taiwan, Thailand, and the Socialist Republic of 
Vietnam: Postponement of Preliminary Determinations in the Less-
Than-Fair-Value Investigations, 85 FR 65791 (October 16, 2020).
    \7\ The deadline for interested parties to submit scope case and 
rebuttal briefs will be established in the preliminary scope 
decision memorandum.
---------------------------------------------------------------------------

Methodology

    Commerce is conducting this investigation in accordance with 
section 701 of the Act. For each of the subsidy programs found 
countervailable, Commerce preliminarily determines that there is a 
subsidy, i.e., a financial contribution by an ``authority'' that gives 
rise to a benefit to the recipient, and that the subsidy is 
specific.\8\
---------------------------------------------------------------------------

    \8\ See sections 771(5)(B) and (D) of the Act regarding 
financial contribution; section 771(5)(E) of the Act regarding 
benefit; and section 771(5A) of the Act regarding specificity.
---------------------------------------------------------------------------

Alignment

    In accordance with section 705(a)(1) of the Act and 19 CFR 
351.210(b)(4), Commerce is aligning the final CVD determination in this 
investigation with the final determination in the companion AD 
investigation of passenger tires from Vietnam based on a request made 
by the petitioner.\9\ Consequently, the final CVD determination will be 
issued on the same date as the final AD determination, which is 
currently scheduled to be issued no later than March 15, 2021, unless 
postponed.
---------------------------------------------------------------------------

    \9\ See Petitioner's Letter, ``Passenger Vehicle and Light Truck 
Tires from Vietnam: Request for Alignment,'' dated October 13, 2020.
---------------------------------------------------------------------------

All-Others Rate

    Sections 703(d) and 705(c)(5)(A) of the Act provide that in the 
preliminary determination, Commerce shall determine an estimated all-
others rate for companies not individually examined. This rate shall be 
an amount equal to the weighted average of the estimated subsidy rates 
established for those companies individually examined, excluding any 
zero and de minimis rates and any rates based entirely under section 
776 of the Act.
    In this investigation, Commerce calculated individual estimated 
countervailable subsidy rates for Kumho Tire (Vietnam) Co., Ltd. and 
Sailun (Vietnam) Co., Ltd. that are not zero, de minimis, or based 
entirely on facts otherwise available. Commerce calculated the all-
others rate using a weighted average of the individual estimated 
subsidy rates calculated for the examined respondents using each 
company's publicly-ranged values for the merchandise under 
consideration.\10\
---------------------------------------------------------------------------

    \10\ With two respondents under examination, Commerce normally 
calculates: (A) A weighted-average of the estimated subsidy rates 
calculated for the examined respondents; (B) a simple average of the 
estimated subsidy rates calculated for the examined respondents; and 
(C) a weighted-average of the estimated subsidy rates calculated for 
the examined respondents using each company's publicly-ranged U.S. 
sale quantities for the merchandise under consideration. Commerce 
then compares (B) and (C) to (A) and selects the rate closest to (A) 
as the most appropriate rate for all other producers and exporters. 
See, e.g., Ball Bearings and Parts Thereof from France, Germany, 
Italy, Japan, and the United Kingdom: Final Results of Antidumping 
Duty Administrative Reviews, Final Results of Changed-Circumstances 
Review, and Revocation of an Order in Part, 75 FR 53661, 53663 
(September 1, 2010). As complete publicly ranged sales data was 
available, Commerce based the all-others rate on the publicly ranged 
sales data of the mandatory respondents. For a complete analysis of 
the data, please see Memorandum, ``Countervailing Duty Investigation 
of Passenger Vehicle and Light Truck Tires from the Socialist 
Republic of Vietnam: Calculation of All-Others Rate,'' dated 
concurrently with this notice.
---------------------------------------------------------------------------

Preliminary Determination

    Commerce preliminarily determines that the following estimated 
countervailable subsidy rates exist:

------------------------------------------------------------------------
                                                           Subsidy rate
                         Company                             (percent)
------------------------------------------------------------------------
Kumho Tire (Vietnam) Co., Ltd...........................           10.08

[[Page 71609]]

 
Sailun (Vietnam) Co., Ltd...............................            6.23
All Others..............................................            6.77
------------------------------------------------------------------------

Suspension of Liquidation

    In accordance with section 703(d)(1)(B) and (d)(2) of the Act, 
Commerce will direct U.S. Customs and Border Protection (CBP) to 
suspend liquidation of entries of subject merchandise as described in 
the scope of the investigation section entered, or withdrawn from 
warehouse, for consumption on or after the date of publication of this 
notice in the Federal Register. Further, pursuant to 19 CFR 351.205(d), 
Commerce will instruct CBP to require a cash deposit equal to the rates 
indicated above.

Disclosure

    Commerce intends to disclose its calculations and analysis 
performed to interested parties in this preliminary determination 
within five days of its public announcement, or if there is no public 
announcement, within five days of the date of this notice in accordance 
with 19 CFR 351.224(b).

Verification

    Commerce is currently unable to conduct on-site verification of the 
information relied upon in making its final determination in this 
investigation. Accordingly, we intend to take additional steps in lieu 
of on-site verification. Commerce will notify interested parties of any 
additional documentation or information required.

Public Comment

    Case briefs or other written comments on non-scope issues may be 
submitted to the Assistant Secretary for Enforcement and Compliance. 
Interested parties will be notified of the timeline for the submission 
of such case briefs and written comments at a later date. Rebuttal 
briefs, limited to issues raised in case briefs, may be submitted no 
later than seven days after the deadline date for case briefs.\11\ 
Commerce has modified certain of its requirements for serving documents 
containing business proprietary information until further notice.\12\ 
Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who submit case 
briefs or rebuttal briefs in this investigation are encouraged to 
submit with each argument: (1) A statement of the issue; (2) a brief 
summary of the argument; and (3) a table of authorities.
---------------------------------------------------------------------------

    \11\ See 19 CFR 351.309; see also 19 CFR 351.303 (for general 
filing requirements); see also Temporary Rule Modifying AD/CVD 
Service Requirements Due to COVID-19, 85 FR 17006, 17007 (March 26, 
2020).
    \12\ See Temporary Rule Modifying AD/CVD Service Requirements 
Due to COVID-19; Extension of Effective Period, 85 FR 41363 (July 
10, 2020).
---------------------------------------------------------------------------

    Pursuant to 19 CFR 351.310(c), interested parties who wish to 
request a hearing, limited to issues raised in the case and rebuttal 
briefs, must submit a written request to the Assistant Secretary for 
Enforcement and Compliance, U.S. Department of Commerce within 30 days 
of the date of publication of this notice. Requests should contain the 
party's name, address, and telephone number, the number of 
participants, whether any participant is a foreign national, and a list 
of the issues to be discussed. If a request for a hearing is made, 
Commerce intends to hold the hearing at a time and date to be 
determined. Parties should confirm by telephone the date, time, and 
location of the hearing two days before the scheduled date.

International Trade Commission Notification

    In accordance with section 703(f) of the Act, Commerce will notify 
the International Trade Commission (ITC) of its determination. If the 
final determination is affirmative, the ITC will determine before the 
later of 120 days after the date of this preliminary determination or 
45 days after the final determination.

Notification to Interested Parties

    This determination is issued and published pursuant to sections 
703(f) and 777(i) of the Act and 19 CFR 351.205(c).

    Dated: October 30, 2020.
Jeffrey I. Kessler,
Assistant Secretary for Enforcement and Compliance.

Appendix I

Scope of the Investigation

    The scope of this investigation is passenger vehicle and light 
truck tires. Passenger vehicle and light truck tires are new 
pneumatic tires, of rubber, with a passenger vehicle or light truck 
size designation. Tires covered by this investigation may be tube-
type, tubeless, radial, or non-radial, and they may be intended for 
sale to original equipment manufacturers or the replacement market.
    Subject tires have, at the time of importation, the symbol 
``DOT'' on the sidewall, certifying that the tire conforms to 
applicable motor vehicle safety standards. Subject tires may also 
have the following prefixes or suffix in their tire size 
designation, which also appears on the sidewall of the tire:
    Prefix designations:
    P--Identifies a tire intended primarily for service on passenger 
cars.
    LT--Identifies a tire intended primarily for service on light 
trucks.
    Suffix letter designations:
    LT--Identifies light truck tires for service on trucks, buses, 
trailers, and multipurpose passenger vehicles used in nominal 
highway service.
    All tires with a ``P'' or ``LT'' prefix, and all tires with an 
``LT'' suffix in their sidewall markings are covered by this 
investigation regardless of their intended use.
    In addition, all tires that lack a ``P'' or ``LT'' prefix or 
suffix in their sidewall markings, as well as all tires that include 
any other prefix or suffix in their sidewall markings, are included 
in the scope, regardless of their intended use, as long as the tire 
is of a size that fits passenger cars or light trucks. Sizes that 
fit passenger cars and light trucks include, but are not limited to, 
the numerical size designations listed in the passenger car section 
or light truck section of the Tire and Rim Association Year Book, as 
updated annually. The scope includes all tires that are of a size 
that fits passenger cars or light trucks, unless the tire falls 
within one of the specific exclusions set out below.
    Passenger vehicle and light truck tires, whether or not attached 
to wheels or rims, are included in the scope. However, if a subject 
tire is imported attached to a wheel or rim, only the tire is 
covered by the scope.
    Specifically excluded from the scope are the following types of 
tires:
    (1) Racing car tires; such tires do not bear the symbol ``DOT'' 
on the sidewall and may be marked with ``ZR'' in size designation;
    (2) pneumatic tires, of rubber, that are not new, including 
recycled and retreaded tires;
    (3) non-pneumatic tires, such as solid rubber tires;
    (4) tires designed and marketed exclusively as temporary use 
spare tires for passenger vehicles which, in addition, exhibit each 
of the following physical characteristics:
    (a) The size designation and load index combination molded on 
the tire's sidewall are listed in Table PCT-1B (``T'' Type Spare 
Tires for Temporary Use on Passenger Vehicles) or PCT-1B (``T'' Type 
Diagonal (Bias) Spare Tires for Temporary Use on Passenger Vehicles) 
of the Tire and Rim Association Year Book,
    (b) the designation ``T'' is molded into the tire's sidewall as 
part of the size designation, and,
    (c) the tire's speed rating is molded on the sidewall, 
indicating the rated speed in MPH or a letter rating as listed by 
Tire and Rim Association Year Book, and the rated speed is 81 MPH or 
a ``M'' rating;
    (5) tires designed and marketed exclusively for specialty tire 
(ST) use which, in addition, exhibit each of the following 
conditions:
    (a) The size designation molded on the tire's sidewall is listed 
in the ST sections of the Tire and Rim Association Year Book,
    (b) the designation ``ST'' is molded into the tire's sidewall as 
part of the size designation,
    (c) the tire incorporates a warning, prominently molded on the 
sidewall, that the tire is ``For Trailer Service Only'' or ``For 
Trailer Use Only'',
    (d) the load index molded on the tire's sidewall meets or 
exceeds those load indexes listed in the Tire and Rim Association 
Year Book for the relevant ST tire size, and

[[Page 71610]]

    (e) either
    (i) the tire's speed rating is molded on the sidewall, 
indicating the rated speed in MPH or a letter rating as listed by 
Tire and Rim Association Year Book, and the rated speed does not 
exceed 81 MPH or an ``M'' rating; or
    (ii) the tire's speed rating molded on the sidewall is 87 MPH or 
an ``N'' rating, and in either case the tire's maximum pressure and 
maximum load limit are molded on the sidewall and either
    (1) both exceed the maximum pressure and maximum load limit for 
any tire of the same size designation in either the passenger car or 
light truck section of the Tire and Rim Association Year Book; or
    (2) if the maximum cold inflation pressure molded on the tire is 
less than any cold inflation pressure listed for that size 
designation in either the passenger car or light truck section of 
the Tire and Rim Association Year Book, the maximum load limit 
molded on the tire is higher than the maximum load limit listed at 
that cold inflation pressure for that size designation in either the 
passenger car or light truck section of the Tire and Rim Association 
Year Book;
    (6) tires designed and marketed exclusively for off-road use and 
which, in addition, exhibit each of the following physical 
characteristics:
    (a) The size designation and load index combination molded on 
the tire's sidewall are listed in the off-the-road, agricultural, 
industrial or ATV section of the Tire and Rim Association Year Book,
    (b) in addition to any size designation markings, the tire 
incorporates a warning, prominently molded on the sidewall, that the 
tire is ``Not For Highway Service'' or ``Not for Highway Use'',
    (c) the tire's speed rating is molded on the sidewall, 
indicating the rated speed in MPH or a letter rating as listed by 
the Tire and Rim Association Year Book, and the rated speed does not 
exceed 55 MPH or a ``G'' rating, and
    (d) the tire features a recognizable off-road tread design.
    The products covered by this investigation are currently 
classified under the following Harmonized Tariff Schedule of the 
United States (HTSUS) subheadings: 4011.10.10.10, 4011.10.10.20, 
4011.10.10.30, 4011.10.10.40, 4011.10.10.50, 4011.10.10.60, 
4011.10.10.70, 4011.10.50.00, 4011.20.10.05, and 4011.20.50.10. 
Tires meeting the scope description may also enter under the 
following HTSUS subheadings: 4011.90.10.10, 4011.90.10.50, 
4011.90.20.10, 4011.90.20.50, 4011.90.80.10, 4011.90.80.50, 
8708.70.45.30, 8708.70.45.46, 8708.70.45.48, 8708.70.45.60, 
8708.70.60.30, 8708.70.60.45, and 8708.70.60.60. While HTSUS 
subheadings are provided for convenience and for customs purposes, 
the written description of the subject merchandise is dispositive.

Appendix II

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary
II. Background
III. Scope of the Investigation
IV. Scope Comments
V. Injury Test
VI. Application of the CVD Law to Imports From Vietnam
VII. Subsidies Valuation
VIII. Benchmarks and Interest Rates
IX. Analysis of Programs
X. Conclusion

[FR Doc. 2020-24913 Filed 11-9-20; 8:45 am]
BILLING CODE 3510-DS-P