Vehicle-Mounted Elevating and Rotation Work Platforms (Aerial Lifts) Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements

James S. Frederick
Department of Labor
3 May 2021

[Federal Register Volume 86, Number 83 (Monday, May 3, 2021)]
[Notices]
[Pages 23434-23435]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-09206]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2011-0185]


Vehicle-Mounted Elevating and Rotation Work Platforms (Aerial 
Lifts) Standard; Extension of the Office of Management and Budget's 
(OMB) Approval of Information Collection (Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning the proposal to 
extend the Office of Management and Budget's (OMB) approval of the 
information collection requirements specified in the Vehicle-Mounted 
Elevating and Rotation Work Platforms (Aerial Lifts) Standard.

DATES: Comments must be submitted (postmarked, sent, or received) by 
July 2, 2021.

ADDRESSES: 
    Electronically: You may submit comments, including attachments, 
electronically at http://www.regulations.gov, the Federal e-Rulemaking 
Portal. Follow the instructions online for submitting comments.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov. Documents in the docket are 
listed in the http://www.regulations.gov index; however, some 
information (e.g., copyrighted material) is not publicly available to 
read or download through the website. All submissions, including 
copyrighted material, are available for inspection through the OSHA 
Docket Office. Contact the OSHA Docket Office for assistance in 
locating docket submissions.
    Instructions: All submissions must include the agency name and the 
OSHA docket number for this Federal Register notice (OSHA-2011-0185). 
OSHA will place comments and requests to speak, including personal 
information, in the public docket, which may be available online. 
Therefore, OSHA cautions interested parties about submitting personal 
information such as Social Security numbers and birthdates. For further 
information on submitting comments, see the ``Public Participation'' 
heading in the section of this notice titled SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT: Seleda Perryman or Theda Kenney, 
Directorate of Standards and Guidance, OSHA, U.S. Department of Labor; 
telephone (202) 693-2222.

SUPPLEMENTARY INFORMATION:

I. Background

    The Department of Labor, as part of the continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing collection of 
information in accordance with the Paperwork Reduction Act (PRA) (44 
U.S.C. 3506(c)(2)(A)). This program ensures that information is in the 
desired format, reporting burden (time and costs) is minimal, 
collection instruments are clearly understood, and OSHA's estimate of 
the information collection burden is accurate. The Occupational Safety 
and Health Act of 1970 (OSH Act) (29 U.S.C. 651 et seq.) authorizes 
information collection by employers as necessary or appropriate for 
enforcement of the Act or for developing information regarding the 
causes and prevention of occupational injuries, illnesses, and 
accidents (29 U.S.C. 657). The OSH Act also requires that OSHA obtain 
such information with minimum burden upon employers, especially those 
operating small businesses, and to reduce to the maximum extent 
feasible unnecessary duplication of efforts in obtaining information 
(29 U.S.C. 657).
    Manufacturer's Certification of Modifications (Sec.  
1910.67(b)(2)). The Standard requires that when aerial lifts are 
``field modified'' for uses other than those intended by the 
manufacturer, the manufacturer or other equivalent entity, such as a 
nationally recognized testing laboratory, must certify in writing that 
the modification is in conformity with all applicable provisions of 
ANSI A92.2-1969 and the OSHA standard and that the modified aerial lift 
is at least as safe as the equipment was before modification. Employers 
are to maintain the certification record and make it available to OSHA 
compliance officers upon request. This record provides assurance to 
employers, workers, and compliance officers that the modified aerial 
lift is safe for use, thereby preventing failure while workers are 
being elevated. The certification record also provides the most 
efficient means for the compliance officers to determine that an 
employer is complying with the Standard.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:

[[Page 23435]]

     Whether the proposed information collection requirements 
are necessary for the proper performance of the agency's functions, 
including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    There are no program changes associated with this package. However, 
there was a slight burden hour decrease because of the methodology the 
agency uses to calculate burden hours. The agency uses fractions so 
that the public can better follow our calculations.
    Type of Review: Extension of a currently approved collection.
    Title: Vehicle-Mounted Elevating and Rotation Work Platforms 
(Aerial Lifts) Standard (29 CFR part 1910.67).
    OMB Control Number: 1218-0230.
    Affected Public: Business or other for-profits.
    Number of Respondents: 1,000.
    Frequency of Responses: On occasion.
    Total Responses: 1,000.
    Average Time per Response: Various.
    Estimated Total Burden Hours: 17.
    Estimated Cost (Operation and Maintenance): $0.

IV. Public Participation--Submission of Comments on This Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. Please 
note: While OSHA's Docket Office is continuing to accept and process 
submissions by regular mail, due to the COVID-19 pandemic, the Docket 
Office is closed to the public and not able to receive submissions to 
the docket by hand, express mail, messenger, and courier service. All 
comments, attachments, and other material must identify the agency name 
and the OSHA docket number for the ICR (Docket No. OSHA-2011-0085). You 
may supplement electronic submissions by uploading document files 
electronically. If you wish to mail additional materials in reference 
to an electronic or facsimile submission, you must submit them to the 
OSHA Docket Office (see the section of this notice titled ADDRESSES). 
The additional materials must clearly identify electronic comments by 
your name, date, and the docket number so that the agency can attach 
them to your comments.
    Due to security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments.
    Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as social security numbers and 
date of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download from this 
website. All submissions, including copyrighted material, are available 
for inspection and copying at the OSHA Docket Office. Information on 
using the http://www.regulations.gov website to submit comments and 
access the docket is available at the website's ``User Tips'' link. 
Contact the OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627) 
for information about materials not available from the website, and for 
assistance in using the internet to locate docket submissions.

V. Authority and Signature

    James S. Fredrick, Acting Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 
(77 FR 3912).

    Signed at Washington, DC, on April 23, 2021.
James S. Frederick,
Acting Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2021-09206 Filed 4-30-21; 8:45 am]
BILLING CODE 4510-26-P