Notice of Receipt of Petition for Decision That Nonconforming 1992 Volvo 740 GL and 940 GL Sedan and Wagon Passenger Cars Are Eligible for Importation Publication: Federal Register Agency: National Highway Traffic Safety Administration Byline: Marilynne Jacobs Date: 10 August 1995 Subject: American Government • Safety Topics: Volvo 740 • Volvo 940

[Federal Register Volume 60, Number 154 (Thursday, August 10, 1995)]
[Notices]
[Pages 40878-40879]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 95-19711]



-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration
[Docket No. 95-61; Notice 1]


Notice of Receipt of Petition for Decision That Nonconforming 
1992 Volvo 740 GL and 940 GL Sedan and Wagon Passenger Cars Are 
Eligible for Importation

AGENCY: National Highway Traffic Safety Administration, DOT.

ACTION: Notice of receipt of petition for decision that nonconforming 
1992 Volvo 740 GL and 940 GL Sedan and Wagon passenger cars are 
eligible for importation.

-----------------------------------------------------------------------

SUMMARY: This notice announces receipt by the National Highway Traffic 
Safety Administration (NHTSA) of a petition for a decision that 1992 
Volvo 740 GL and 940 GL sedans and wagons that were not originally 
manufactured to comply with all applicable Federal motor vehicle safety 
standards are eligible for importation into the United States because 
(1) they are substantially similar to vehicles that were originally 
manufactured for importation into and sale in the United States and 
that were certified by their manufacturer as complying with the safety 
standards, and (2) they are capable of being readily altered to conform 
to the standards.

DATES: The closing date for comments on the petition is September 11, 
1995.

ADDRESSES: Comments should refer to the docket number and notice 
number, and be submitted to: Docket Section, Room 5109, National 
Highway Traffic Safety Administration, 400 Seventh St., 

[[Page 40879]]
SW, Washington, DC 20590. [Docket hours are from 9:30 am to 4 pm]

FOR FURTHER INFORMATION CONTACT:
George Entwistle, Office of Vehicle Safety Compliance, NHTSA (202-366-
5306).

SUPPLEMENTARY INFORMATION: 

Background

    Under 49 U.S.C. 30141(a)(1)(A) (formerly section 108(c)(3)(A)(i)(I) 
of the National Traffic and Motor Vehicle Safety Act (the Act)), a 
motor vehicle that was not originally manufactured to conform to all 
applicable Federal motor vehicle safety standards shall be refused 
admission into the United States unless NHTSA has decided that the 
motor vehicle is substantially similar to a motor vehicle originally 
manufactured for importation into and sale in the United States, 
certified under 49 U.S.C. 30115 (formerly section 114 of the Act), and 
of the same model year as the model of the motor vehicle to be 
compared, and is capable of being readily altered to conform to all 
applicable Federal motor vehicle safety standards.
    Petitions for eligibility decisions may be submitted by either 
manufacturers or importers who have registered with NHTSA pursuant to 
49 CFR Part 592. As specified in 49 CFR 593.7, NHTSA publishes notice 
in the Federal Register of each petition that it receives, and affords 
interested persons an opportunity to comment on the petition. At the 
close of the comment period, NHTSA decides, on the basis of the 
petition and any comments that it has received, whether the vehicle is 
eligible for importation. The agency then publishes this decision in 
the Federal Register.
    J.K. Motors of Kingsville, Maryland (``J.K.'') (Registered Importer 
90-006) has petitioned NHTSA to decide whether 1992 Volvo 740 GL and 
940 GL sedans and wagons are eligible for importation into the United 
States. The vehicles which J.K. believes are substantially similar are 
1992 Volvo 740 GL and 940 GL sedans and wagons that were manufactured 
for importation into, and sale in, the United States and certified by 
their manufacturer as conforming to all applicable Federal motor 
vehicle safety standards.
    The petitioner claims that it carefully compared non-U.S. certified 
1992 Volvo 740 GL and 940 GL sedans and wagons to their U.S. certified 
counterparts, and found the vehicles to be substantially similar with 
respect to compliance with most Federal motor vehicle safety standards.
    J.K. submitted information with its petition intended to 
demonstrate that non-U.S. certified 1992 Volvo 740 GL and 940 GL sedans 
and wagons, as originally manufactured, conforms to many Federal motor 
vehicle safety standards in the same manner as their U.S. certified 
counterparts, or are capable of being readily altered to conform to 
those standards.
    Specifically, the petitioner claims that non-U.S. certified 1992 
Volvo 740 GL and 940 GL sedans and wagons are identical to their U.S. 
certified counterparts with respect to compliance with Standards Nos. 
102 Transmission Shift Level Sequence * * *, 103 Defrosting and 
Defogging Systems, 104 Windshield Wiping and Washing Systems, 105 
Hydraulic Brake Systems, 106 Brake Hoses, 107 Reflecting Surfaces, 109 
New Pneumatic Tires, 113 Hood Latch Systems, 116 Brake Fluid, 124 
Accelerator Control Systems, 201 Occupant Protection in Interior 
Impact, 202 Head Restraints, 203 Impact Protection for the Driver From 
the Steering Control System, 204 Steering Control Rearward 
Displacement, 205 Glazing Materials, 206 Door Locks and Door Retention 
Components, 207 Seating Systems, 209 Seat Belt Assemblies, 210 Seat 
Belt Assembly Anchorages, 211 Wheel Nuts, Wheel Discs and Hubcaps, 212 
Windshield Retention, 214 Side Impact Protection, 216 Roof Crush 
Resistance, 219 Windshield Zone Intrusion, 301 Fuel System Integrity, 
and 302 Flammability of Interior Materials.
    Additionally, the petitioner states that non-U.S. certified 1992 
Volvo 740 GL and 940 GL sedans and wagons comply with the Bumper 
Standard found in 49 CFR Part 581.
    Petitioner also contends that these vehicles are capable of being 
readily altered to meet the following standards, in the manner 
indicated:
    Standard No. 101 Controls and Displays: (a) substitution of a lens 
marked ``Brake'' for a lens with an ECE symbol on the brake failure 
indicator lamp; (b) recalibration of the speedometer/odometer from 
kilometers to miles per hour.
    Standard No. 108 Lamps, Reflective Devices and Associated 
Equipment: (a) Installation of U.S.-model headlamps and front 
sidemarkers; (b) installation of U.S.-model taillamp lenses which 
incorporate rear sidemarkers; (c) installation of a high mounted stop 
lamp.
    Standard No. 110 Tire Selection and Rims: installation of a tire 
information placard.
    Standard No. 111 Rearview Mirror: replacement of the passenger side 
rearview mirror with a U.S.-model component.
    Standard No. 114 Theft Protection: installation of a warning buzzer 
microswitch and a warning buzzer in the steering lock assembly.
    Standard No. 115 Vehicle Identification Number: installation of a 
VIN plate that can be read from outside the left windshield pillar, and 
a VIN reference label on the edge of the door or latch post nearest the 
driver.
    Standard No. 118 Power Window Systems: installation of a relay in 
the power window system so that the window transport is inoperative 
when the ignition is switched off.
    Standard No. 208 Occupant Crash Protection: (a) installation of a 
seat belt warning buzzer; (b) installation of knee bolsters to augment 
the vehicles' air bag based passive restraint system, which otherwise 
conforms to the standard. The petitioner states that in addition to a 
driver's side air bag, the vehicles are equipped with side impact 
protection systems, with manual lap and shoulder belts in the front and 
rear outboard seating positions, and with a manual lap belt in the 
center seating positions.
    Interested persons are invited to submit comments on the petition 
described above. Comments should refer to the docket number and be 
submitted to: Docket Section, National Highway Traffic Safety 
Administration, Room 5109, 400 Seventh Street, SW., Washington, DC 
20590. It is requested but not required that 10 copies be submitted.
    All comments received before the close of business on the closing 
date indicated above will be considered, and will be available for 
examination in the docket at the above address both before and after 
that date. To the extent possible, comments filed after the closing 
date will also be considered. Notice of final action on the petition 
will be published in the Federal Register pursuant to the authority 
indicated below.

    Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8; 
delegations of authority at 49 CFR 1.50 and 501.8.

    Issued on: August 4, 1995.
Marilynne Jacobs,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 95-19711 Filed 8-9-95; 8:45 am]
BILLING CODE 4910-59-M