General Motors Corporation, Renaissance Center, including On-Site Leased Workers From Accretive Solutions, Detroit, Inc., Acro Service Corporation, Aerotek, Inc., Ajilon Consulting, Altair Engineering, Inc., Aquent LLC, Global Technology Associates, LTD, JDM Systems Consultants, Inc., Kelly Service, Inc., Populus Group, TEK Systems, Compuware Corporation, and Nexus Business Solutions, Detroit, MI; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance

Del Min Amy Chen
Federal Register
July 20, 2011

[Federal Register Volume 76, Number 139 (Wednesday, July 20, 2011)]
[Notices]
[Page 43349]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-18237]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Employment and Training Administration

[TA-W-73,164]


General Motors Corporation, Renaissance Center, including On-Site 
Leased Workers From Accretive Solutions, Detroit, Inc., Acro Service 
Corporation, Aerotek, Inc., Ajilon Consulting, Altair Engineering, 
Inc., Aquent LLC, Global Technology Associates, LTD, JDM Systems 
Consultants, Inc., Kelly Service, Inc., Populus Group, TEK Systems, 
Compuware Corporation, and Nexus Business Solutions, Detroit, MI; 
Amended Certification Regarding Eligibility To Apply for Worker 
Adjustment Assistance

    In accordance with Section 223 of the Trade Act of 1974, as amended 
(``Act''), 19 U.S.C. 2273, the Department of Labor issued a 
Certification of Eligibility to Apply for Worker Adjustment Assistance 
on April 23, 2010, applicable to workers of General Motors Corporation, 
Renaissance Center, including on-site leased workers from Accretive 
Solutions, Detroit, Inc., Acro Service Corporation, Aerotek, Inc., 
Ajilon Consulting, Altair Engineering, Inc., Aquent LLC, Global 
Technology Associates, Ltd., JDM Systems Consultants, Inc., Kelly 
Service, Inc., Populus Group, TEK Systems, Detroit, Michigan. The 
notice was published in the Federal Register on May 20, 2010 (75 FR 
28299). The notice was amended on August 31, 2010 to include on-site 
leased workers from Compuware Corporation. The notice was published in 
the Federal Register on September 13, 2010 (75 FR 55613-55614).
    At the request of the State agency, the Department reviewed the 
certification for workers of the subject firm. The workers support 
production of automobiles.
    New information shows that workers leased from Nexus Business 
Solutions were employed on-site at the Detroit, Michigan location of 
General Motors Corporation, Renaissance Center. The Department has 
determined that on-site workers from Nexus Business Solutions were 
sufficiently under the control of the subject firm to be covered by 
this certification.
    Based on these findings, the Department is amending this 
certification to include workers from Nexus Business Solutions working 
on-site at the Detroit, Michigan location of General Motors 
Corporation, Renaissance Center.
    The amended notice applicable to TA-W-73,164 is hereby issued as 
follows:

    All workers of General Motors Corporation, Renaissance Center, 
including on-site leased workers from Accretive Solutions, Detroit, 
Inc., Acro Service Corporation, Aerotek, Inc., Ajilon Consulting, 
Altair Engineering, Inc., Aquent LLC, Global Technology Associates, 
Ltd., JDM Systems Consultants, Inc., Kelly Service, Inc., Populus 
Group, TEK Systems, Compuware Corporation, and Nexus Business 
Solutions, Detroit, Michigan, who became totally or partially 
separated from employment on or after December 18, 2008 through 
April 23, 2012, and all workers in the group threatened with total 
or partial separation from employment on date of certification 
through two years from the date of certification, are eligible to 
apply for adjustment assistance under Chapter 2 of Title II of the 
Trade Act of 1974, as amended.

    Signed at Washington, DC, this 7th day of July 2011.
Del Min Amy Chen,
Certifying Officer, Office of Trade Adjustment Assistance.
[FR Doc. 2011-18237 Filed 7-19-11; 8:45 am]
BILLING CODE 4510-FN-P