Receipt of Petition for Determination That Nonconforming 1989 Peugeot 405 Passenger Cars Are Eligible for Importation

Topics:  Peugeot 405

William A. Boehly
National Highway Traffic Safety Administration
January 27, 1994

[Federal Register Volume 59, Number 18 (Thursday, January 27, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 94-1666]


[[Page Unknown]]

[Federal Register: January 27, 1994]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION
[Docket No. 94-08; Notice 1]

 

Receipt of Petition for Determination That Nonconforming 1989 
Peugeot 405 Passenger Cars Are Eligible for Importation

AGENCY: National Highway Traffic Safety Administration, DOT.

ACTION: Notice of receipt of petition for determination that 
nonconforming 1989 Peugeot 405 passenger cars are eligible for 
importation.

-----------------------------------------------------------------------

SUMMARY: This notice announces receipt by the National Highway Traffic 
Safety Administration (NHTSA) of a petition for a determination that a 
1989 Peugeot 405 that was not originally manufactured to comply with 
all applicable Federal motor vehicle safety standards is eligible for 
importation into the United States because (1) it is substantially 
similar to a vehicle that was originally manufactured for importation 
into and sale in the United States and that was certified by its 
manufacturer as complying with the safety standards, and (2) it is 
capable of being readily modified to conform to the standards.

DATES: The closing date for comments on the petition is February 28, 
1994.

ADDRESSES: Comments should refer to the docket number and notice 
number, and be submitted to: Docket Section, room 5109, National 
Highway Traffic Safety Administration, 400 Seventh Street, SW., 
Washington, DC 20590. (Docket hours are from 9:30 a.m. to 4 p.m.).

FOR FURTHER INFORMATION CONTACT:
Ted Bayler, Office of Vehicle Safety Compliance, NHTSA (202-366-5306).

SUPPLEMENTARY INFORMATION: 

Background

    Under section 108(c)(3)(A)(i) of the National Traffic and Motor 
Vehicle Safety Act (the Act), 15 U.S.C. 1397(c)(3)(A)(i), a motor 
vehicle that was not originally manufactured to conform to all 
applicable Federal motor vehicle safety standards shall be refused 
admission into the United States on and after January 31, 1990, unless 
NHTSA has determined that the motor vehicle is substantially similar to 
a motor vehicle originally manufactured for importation into and sale 
in the United States, certified under section 114 of the Act, and of 
the same model year as the model of the motor vehicle to be compared, 
and is capable of being readily modified to conform to all applicable 
Federal motor vehicle safety standards.
    Petitions for eligibility determinations may be submitted by either 
manufacturers or importers who have registered with NHTSA pursuant to 
49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice 
in the Federal Register of each petition that it receives, and affords 
interested persons an opportunity to comment on the petition. At the 
close of the comment period, NHTSA determines, on the basis of the 
petition and any comments that it has received, whether the vehicle is 
eligible for importation. The agency then publishes this determination 
in the Federal Register.
    G&K Automotive Conversion, Inc. of Santa Ana, California (``G&K'') 
(Registered Importer No. R-90-007) has petitioned NHTSA to determine 
whether 1989 Peugeot 405 passenger cars are eligible for importation 
into the United States. The vehicle which G&K believes is substantially 
similar is the 1989 Peugeot 405 that PSA Peugeot Citroen/USTR 
manufactured for importation into and sale in the United States, and 
certified as conforming to all applicable Federal motor vehicle safety 
standards.
    The petitioner states that it carefully compared the non-U.S.-
certified 1989 Peugeot 405 to its U.S.-certified counterpart, and found 
the two vehicles to be substantially similar with respect to compliance 
with most applicable Federal motor vehicle safety standards.
    G&K submitted information with its petition intended to demonstrate 
that the non-U.S.-certified 1989 Peugeot 405, as originally 
manufactured, conforms to many Federal motor vehicle safety standards 
in the same manner as its U.S.-certified counterpart, or is capable of 
being readily modified to conform to those standards.
    Specifically, the petitioner claims that the non-U.S. certified 
1989 Peugeot 405 is identical to the U.S-certified 1989 Peugeot 405 
with respect to compliance with Standard Nos. 102 Transmission Shift 
Lever Sequence ***, 103 Defrosting and Defogging Systems, 104 
Windshield Wiping and Washing Systems, 105 Hydraulic Brake Systems, 106 
Brake Hoses, 107 Reflecting Surfaces, 109 New Pneumatic Tires, 113 Hood 
Latch Systems, 116 Brake Fluid, 124 Accelerator Control Systems, 201 
Occupant Protection in Interior Impact, 220 Head Restraints, 203 Impact 
Protection for the Driver From the Steering Control System, 204 
Steering Control Rearward Displacement, 205 Glazing Materials, 206 Door 
Locks and Door Retention Components, 207 Seating Systems, 209 Seat Belt 
Assemblies, 210 Seat Belt Assembly Anchorages, 211 Wheel Nuts, Wheel 
Discs and Hubcaps, 212 Windshield Retention, 216 Roof Crush Resistance, 
and 219 Windshield Zone Intrusion.
    Petitioner also contends that the non-U.S.-certified 1989 Peugeot 
405 is capable of being readily modified to meet the following 
standards, in the manner indicated:
    Standard No. 101  Controls and Displays: (a) Substitution of a lens 
marked ``Brake'' for a lens with an ECE symbol on the brake failure 
indicator lamp; (b) recalibration of the speedometer/odometer from 
kilometers to miles per hour.
    Standard No. 108  Lamps, Reflective Devices and Associated 
Equipment: (a) Installation of U.S.-model headlamp assemblies which 
incorporate sealed beam headlamps and front sidemarkers; (b) 
installation of U.S.-model taillamp assemblies which incorporate rear 
sidemarkers; (c) installation of a high mounted stop lamp.
    Standard No. 110  Tire Selection and Rims: Installation of a tire 
information placard.
    Standard No. 111  Rearview Mirrors: Replacement of the passenger 
side rearview mirror, which is convex but lacks the required warning 
statement.
    Standard No. 114  Theft Protection: Installation of a buzzer 
microswitch in the steering lock assembly, and a warning buzzer.
    Standard No. 115  Vehicle Identification Number: Installation of a 
VIN plate that can be read from outside the left windshield pillar, and 
a VIN reference label on the edge of the door or latch post nearest the 
driver.
    Standard No. 118  Power-Operated Window Systems: Rewiring of the 
power window system so that the window transport is inoperative when 
the ignition is switched off.
    Standard No. 208  Occupant Crash Protection: Installation of an 
audible seat belt warning system.
    Standard No. 214  Side Door Strength: Installation of reinforcing 
beams.
    Standard No. 301  Fuel System Integrity: Installation of a rollover 
valve in the fuel tank vent line between the fuel and the evaporative 
emissions collection canister.
    Standard No. 302  Flammability of Interior Materials: Treatment of 
interior materials with a fire retardant spray.
    Additionally, the petitioner states that the bumpers on the non-
U.S.-certified 1989 Peugeot 405 must be reinforced to comply with the 
Bumper Standard found in 49 CFR part 581.
    Interested persons are invited to submit comments on the petition 
described above. Comments should refer to the docket number and be 
submitted to: Docket Section, National Highway Traffic Safety 
Administration, room 5109, 400 Seventh Street, SW., Washington, DC 
20590. It is requested but not required that 10 copies be submitted.
    All comments received before the close of business on the closing 
date indicated above will be considered, and will be available for 
examination in the docket at the above address both before and after 
that date. To the extent possible, comments filed after the closing 
date will also be considered. Notice of final action on the petition 
will be published in the Federal Register pursuant to the authority 
indicated below.

    Authority: 15 U.S.C. 1397(c)(3)(A)(i)(I) and (C)(ii); 49 CFR 
593.8; delegations of authority at 49 CFR 1.50 and 501.8.

    Issued on: January 14, 1994.
William A. Boehly,
Associate Administrator for Enforcement.
[FR Doc. 94-1666 Filed 1-26-94; 8:45 am]
BILLING CODE 4910-59-M