Home Page American Government Reference Desk Shopping Special Collections About Us Contribute



Escort, Inc.






GM Icons
By accessing/using The Crittenden Automotive Library/CarsAndRacingStuff.com, you signify your agreement with the Terms of Use on our Legal Information page. Our Privacy Policy is also available there.

Notice of Receipt of Petition for Determination That Nonconforming 1988 Volkswagen Golf Passenger Cars Are Eligible for Importation


American Government Topics:  Volkswagen Golf

Notice of Receipt of Petition for Determination That Nonconforming 1988 Volkswagen Golf Passenger Cars Are Eligible for Importation

William A. Boehly
National Highway Traffic Safety Administration
2 June 1994


[Federal Register Volume 59, Number 105 (Thursday, June 2, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-13325]


[[Page Unknown]]

[Federal Register: June 2, 1994]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION
[Docket No. 94-46; Notice 1]

 

Notice of Receipt of Petition for Determination That 
Nonconforming 1988 Volkswagen Golf Passenger Cars Are Eligible for 
Importation

AGENCY: National Highway Traffic Safety Administration, DOT.

ACTION: Notice of receipt of petition for determination that 
nonconforming 1988 Volkswagen Golf passenger cars are eligible for 
importation.

-----------------------------------------------------------------------

SUMMARY: This notice announces receipt by the National Highway Traffic 
Safety Administration (NHTSA) of a petition for a determination that a 
1988 Volkswagen Golf that was not originally manufactured to comply 
with all applicable Federal motor vehicle safety standards is eligible 
for importation into the United States because (1) it is substantially 
similar to a vehicle that was originally manufactured for importation 
into and sale in the United States and that was certified by its 
manufacturer as complying with the safety standards, and (2) it is 
capable of being readily modified to conform to the standards.

DATES: The closing date for comments on the petition is July 5, 1994.

ADDRESSES: Comments should refer to the docket number and notice 
number, and be submitted to: Docket Section, room 5109, National 
Highway Traffic Safety Administration, 400 Seventh St., SW., 
Washington, DC 20590. [Docket hours are from 9:30 am to 4 pm]

FOR FURTHER INFORMATION CONTACT:
Ted Bayler, Office of Vehicle Safety Compliance, NHTSA (202-366-5306).

SUPPLEMENTARY INFORMATION:

Background

    Under section 108(c)(3)(A)(i) of the National Traffic and Motor 
Vehicle Safety Act (the Act), 15 U.S.C. 1397(c)(3)(A)(i), a motor 
vehicle that was not originally manufactured to conform to all 
applicable Federal motor vehicle safety standards shall be refused 
admission into the United States on and after January 31, 1990, unless 
NHTSA has determined that the motor vehicle is substantially similar to 
a motor vehicle originally manufactured for importation into and sale 
in the United States, certified under section 114 of the Act, and of 
the same model year as the model of the motor vehicle to be compared, 
and is capable of being readily modified to conform to all applicable 
Federal motor vehicle safety standards.
    Petitions for eligibility determinations may be submitted by either 
manufacturers of importers who have registered with NHTSA pursuant to 
49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice 
in the Federal Register of each petition that it receives, and affords 
interested persons an opportunity to comment on the petition. At the 
close of the comment period, NHTSA determines, on the basis of the 
petition and any comments that it has received, whether the vehicle is 
eligible for importation. The agency then publishes this determination 
in the Federal Register.
    J.K. Motors of Kingsville, Maryland (``J.K.'') (Registered Importer 
R-90-006) has petitioned NHTSA to determine whether 1988 Volkswagen 
Golf passenger cars are eligible for importation into the United 
States. The vehicle which J.K. believes is substantially similar is the 
1988 Volkswagen Golf that was manufactured for important into, and sale 
in, the United States and certified by its manufacturer, Volkswagenwerk 
A.G., as conforming to all applicable Federal motor vehicle safety 
standards.
    The petitioner claims that it carefully compared the non-U.S. 
certified 1988 Volkswagen Golf to its U.S. certified counterpart, and 
found the two vehicles to be substantially similar with respect to 
compliance with most Federal motor vehicle safety standards.
    J.K. submitted information with its petition intended to 
demonstrate that the non-U.S. certified 1988 Volkswagen Golf, as 
originally manufactured, conforms to many Federal motor vehicle safety 
standards in the same manner as its U.S. certified counterpart, or is 
capable of being readily modified to conform to those standards.
    Specifically, the petitioner claims that the non-U.S. certified 
1988 Volkswagen Golf is identical to its U.S. certified counterpart 
with respect to compliance with Standards Nos. 102 Transmission Shift 
Lever Sequence * * *., 103 Defrosting and Defogging Systems, 104 
Windshield Wiping and Washing Systems, 105 Hydraulic Brake Systems, 106 
Brake Hoses, 107 Reflecting Surfaces, 109 New Pneumatic Tires, 113 Hood 
Latch Systems, 116 Brake Fluid, 124 Accelerator Control Systems, 201 
Occupant Protection in Interior Impact, 202 Head Restraints, 203 Impact 
Protection for the Driver From the Steering Control System, 204 
Streering Control Rearward Displacement, 205 Glazing Materials, 206 
Door Locks and Door Retention Components, 207 Seating System, 209 Seat 
Belt Assemblies, 210 Seat Belt Assembly Anchorages, 211 Wheel Nuts, 
Wheel Discs and Hubcaps, 212 Windshield Retention, 216 Roof Crush 
Resistance, 219 Windshield Zone Intrusion, 301 Fuel System Integrity, 
and 302 Flammability of Interior Materials.
    Petitioner also contends that the vehicle is capable of being 
readily modified to meet the following standards, in the manner 
indicated:
    Standard No. 101 Controls and Displays: (a) Substitution of a lens 
marked ``Brake'' for a lens with an ECE symbol on the brake failure 
indicator lamp; (b) recalibration of the speedometer/odometer from 
Kilometers to miles per hour.
    Standard No. 108 Lamps, Reflective Devices and Associated 
Equipment: (a) Installation of U.S.--model headlamp assemblies which 
incorporate sealed beam headlamps and front sidemarkers; (b) 
installation of U.S.--model taillamp assemblies which incorporate rear 
sidemarkers; (c) installation of a high mounted stop lamp; (d) 
replacement of bulb failure modules with U.S.--model components.
    Standard No. 110 Tire Selection and Rims: installation of a tire 
information placard.
    Standard No. 111 Rearview Mirror: replacement of the passenger side 
rearview mirror with a U.S.-model component.
    Standard No. 114 Theft Protection: installation of a key 
microswitch in the steering lock assembly, and a warning buzzer.
    Standard No. 115 Vehicle Identification Number: installation of a 
VIN plate that can be read from outside the left windshield pillar, and 
VIN reference label on the edge of the door or latch post nearest the 
driver.
    Standard No. 118 Power-Operated Window Systems: installation of a 
relay in the wiring for the power window system so that the window 
transport is inoperative when the ignition is turned off.
    Standard No. 208 Occupant Crash Protection: installation of a seat 
belt warning buzzer, wired to the seatbelt latch.
    Standard No. 214 Side Door Strength: installation of doorbars.
    Additionally, the petitioner states that the bumpers on the 1988 
Volkswagen Golf must be reinforced to comply with the Bumper Standard 
found in 49 CFR part 581.
    Interested persons are invited to submit comments on the petition 
described above. Comments should refer to the docket number and be 
submitted to: Docket Section, National Highway Traffic Safety 
Administration, Room 5109, 400 Seventh Street, S.W., Washington, DC 
20590. It is requested but not required that 10 copies be submitted.
    All comments received before the close of business on the closing 
date indicated above will be considered, and will be available for 
examination in the docket at the above address both before and after 
that date. To the extent possible, comments filed after the closing 
date with also be considered. Notice of final action on the petition 
will be published in the Federal Register pursuant to the authority 
indicated below.

    Authority: 15 U.S.C. 1397(c)(3)(A)(i)(I) and (C)(ii); 49 CFR 
593.8; delegations of authority at 49 CFR 1.50 and 501.8.

    Issued on: May 26, 1994.
William A. Boehly,
Associate Administrator for Enforcement.
[FR Doc. 94-13325 Filed 6-1-94; 8:45 am]
BILLING CODE 4910-59-M




The Crittenden Automotive Library